Elsa Kong

Member
Member
Joined
Jan 12, 2018
Messages
85
Reaction score
6
Points
18
2018-7-11 New 70-761 Exam Dumps with PDF and VCE Free Updated Today! Following are some new 70-761 Real Exam Questions:

QUESTION 136
Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some question sets might have more than one correct solution, while others might not have a correct solution.
After you answer a question in this section. You will NOT be able to return to it. As a result, these questions will not appear in the review screen.
You create a table named Products by running the following Transact-SQL statement:

You have the following stored procedure:

You need to modify the stored procedure to meet the following new requirements:
Insert product records as a single unit of work.
Return error number 51000 when a product fails to insert into the database.
If a product record insert operation fails, the product information must not be permanently written to the database.
Solution: You run the following Transact-SQL statement:

Does the solution meet the goal?


A. Yes
B. No


Answer: B

QUESTION 137
Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some question sets might have more than one correct solution, while others might not have a correct solution.
After you answer a question in this section. You will NOT be able to return to it. As a result, these questions will not appear in the review screen.
You create a table named Products by running the following Transact-SQL statement:

You have the following stored procedure:

You need to modify the stored procedure to meet the following new requirements:
Insert product records as a single unit of work.
Return error number 51000 when a product fails to insert into the database.
If a product record insert operation fails, the product information must not be permanently written to the database.
Solution: You run the following Transact-SQL statement:

Does the solution meet the goal?


A. Yes
B. No


Answer: B

QUESTION 138
You have a database that contains the following tables:
Customer

CustomerAudit

Where the value of the CustomerID column equals 3, you need to update the value of the CreditLimit column to 1000 for the customer. You must ensure that the change to the record in the Customer table is recorded on the CustomerAudit table.
Which Transact-SQL statement should you run?


A. Option A
B. Option B
C. Option C
D. Option D


Answer: C

QUESTION 139
You have a database for a banking system. The database has two tables named tblDepositAcct and tblLoanAcct that store deposit and loan accounts, respectively. Both tables contain the following columns:

You need to determine the total number of customers who have only deposit accounts.
Which Transact-SQL statement should you run?


A. Option A
B. Option B
C. Option C
D. Option D
E. Option E
F. Option F
G. Option G
H. Option H


Answer: F
Explanation:

https://docs.microsoft.com/en-us/sql/t-sql/language-elements/set-operators-except-and-intersect-transact-sql?view=sql-server-2017

QUESTION 140
Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some question sets might have more than one correct solution, while others might not have a correct solution.
After you answer a question in this section. You will NOT be able to return to it. As a result, these questions will not appear in the review screen.
You have a table named Products that stores information about products your company sells. The table has a column named ListPrice that stores retail pricing information for products.
Some products are used only internally by the company. Records for these products are maintained in the Products table for inventory purposes. The price for each of these products is $0.00. Customers are not permitted to order these products.
You need to increase the list price for products that cost less than $100 by 10 percent. You must only increase pricing for products that customers are permitted to order.
Solution: You run the following Transact-SQL statement:

Does the solution meet the goal?


A. Yes
B. No


Answer: B
Explanation:
Mathematical equation will only return 10 % of the value.


QUESTION 141
Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some question sets might have more than one correct solution, while others might not have a correct solution.
After you answer a question in this section. You will NOT be able to return to it. As a result, these questions will not appear in the review screen.
You have a table that was created by running the following Transact-SQL statement:

The Products table includes the data shown in the following table:

TotalUnitPrice is calculated by using the following formula:
TotalUnitPrice = UnitPrice * (UnitsInStock + UnitsOnOrder)
You need to ensure that the value returned for TotalUnitPrice for ProductB is equal to 600.00.
Solution: You run the following Transact-SQL statement:

Does the solution meet the goal?


A. Yes
B. No


Answer: B

QUESTION 142
Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some question sets might have more than one correct solution, while others might not have a correct solution.
After you answer a question in this section. You will NOT be able to return to it. As a result, these questions will not appear in the review screen.
You create a table named Customer by running the following Transact-SQL statement:

You must insert the following data into the Customer table:

You need to ensure that both records are inserted or neither record is inserted.
Solution: You run the following Transact-SQL statement:

Does the solution meet the goal?


A. Yes
B. No


Answer: B
Explanation:

https://docs.microsoft.com/it-it/sql/t-sql/statements/insert-transact-sql?view=sql-server-2017

QUESTION 143
Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some question sets might have more than one correct solution, while others might not have a correct solution.
After you answer a question in this section. You will NOT be able to return to it. As a result, these questions will not appear in the review screen.
You have a database that contains a single table named tblVehicleRegistration. The table is defined as follows:

You run the following query:

The query output window displays the following error message: “Conversion failed when converting the varchar value ‘AB012’ to data type int.”
You need to resolve the error.
Solution: You modify the Transact-SQL statement as follows:

Does the solution meet the goal?


A. Yes
B. No


Answer: B
Explanation:

https://docs.microsoft.com/en-us/sql/t-sql/functions/cast-and-convert-transact-sql?view=sql-server-2017

QUESTION 144
Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some question sets might have more than one correct solution, while others might not have a correct solution.
After you answer a question in this section. You will NOT be able to return to it. As a result, these questions will not appear in the review screen.
You have a database that contains a single table named tblVehicleRegistration. The table is defined as follows:

You run the following query:

The query output window displays the following error message: “Conversion failed when converting the varchar value ‘AB012’ to data type int.”
You need to resolve the error.
Solution: You modify the Transact-SQL statement as follows:

Does the solution meet the goal?


A. Yes
B. No


Answer: B


1.|2018 Latest 70-761 Exam Dumps (PDF & VCE) 171Q&As Download:

https://www.braindump2go.com/70-761.html

2.|2018 Latest 70-761 Exam Questions & Answers Download:

https://drive.google.com/drive/folders/0B75b5xYLjSSNZG9yTW9reVdkZG8?usp=sharing
 

AdelmoRichard

Member
Member
Joined
Jul 11, 2018
Messages
32
Reaction score
4
Points
6
I think I have spent my money at the right place. I feel like I have an asset now after using 70-761 dumps because I have gained so much knowledge and information. I must say my confidence is boosted manifolds. I have never seen such teaching method before. It makes you creative and makes you think about studying course with creativity.
 

xander luis

Member
Member
Joined
Jun 28, 2018
Messages
185
Reaction score
108
Points
18
I have recently pass Microsoft 70-761 exam. After the full time training from institution but I was not sure I can pass the exam Microsoft 70-761. Because after training having no idea about type of paper pattern and types questions answers. I search study martial here and there. However, I will not find valid 70-761 authentic material. My seniors recommended using Microsoft 70-761 dumps pdf provided by the braindumpspdf. I will not sure about it but when I prepare these Microsoft 70-761 braindumpspdf approximately 89% exam questions comes from Microsoft 70-761 pdf file. I must recommend you valid 70-761 study material. https://www.braindumpspdf.com/exam/70-761.html
 

Johanna Konig

Member
Member
Joined
Jun 8, 2017
Messages
211
Reaction score
13
Points
18
2018/December Braindump2go 70-761 Real Exam Dumps with PDF and VCE New Updated Today! Following are some new 70-761 Real Exam Questions:

QUESTION 184
Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some question sets might have more than one correct solution, while others might not have a correct solution.
After you answer a question in this section, you will NOT be able to return to it. As a result, these questions will not appear in the review screen.
You create a table named Customer by running the following Transact-SQL statement:
You create a cursor by running the following Transact-SQL statement:
If the credit limit is zero, you must delete the customer record while fetching data.
You need to add the DELETE statement.
Solution: You add the following Transact-SQL statement:
Does the solution meet the goal?


A. Yes
B. No


Answer: B
Explanation:


QUESTION 185
Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some question sets might have more than one correct solution, while others might not have a correct solution.
After you answer a question in this section, you will NOT be able to return to it. As a result, these questions will not appear in the review screen.
You create a table named Customer by running the following Transact-SQL statement:
You create a cursor by running the following Transact-SQL statement:
If the credit limit is zero, you must delete the customer record while fetching data.
You need to add the DELETE statement.
Solution: You add the following Transact-SQL statement:
Does the solution meet the goal?


A. Yes
B. No


Answer: B

QUESTION 186
You have a table named Table1 that contains 200 million rows. Table1 contains a column named SaleDate that has a data type of DateTime2(3).
Users report that the following query runs slowly.
You need to reduce the amount of time it takes to run the query.
What should you use to replace the WHERE statement?


A. WHERE SaleDate >= '2017-01-01' AND SaleDate < '2018-01-01'
B. WHERE cast(SaleDate as varchar(10)) BETWEEN '2017-01-01' AND '2017-12-31'
C. WHERE cast(SaleDate as date) BETWEEN '2017-01-01'
AND '2017-12-31'
D. WHERE 2017 = year(SaleDate)


Answer: C
Explanation


QUESTION 187
You have a database that tracks customer complaints.
The database contains a table named Complaints that includes the following columnsYou need to create a query that lists complaints about defective products.
The report must include complaints where the exact phrase “defective product” occurs, as well as complaints where similar phrases occur.
Which Transact-SQL statement should you run?


A. SELECT ComplaintID, ComplaintTranscript FROM Complaints WHERE CONTAINS(CustomerTranscript, 'defective')
AND CONTAINS(CustomerTranscript, 'product')
B. SELECT ComplaintID, CustomerTranscript FROM Complaints
WHERE SOUNDEX('defective') = SOUNDEX('product')
C. SELECT ComplaintID, CustomerTranscript FROM Complaints
WHERE FREETEXT(CustomerTranscript, 'defective product')
D. SELECT ComplaintID, Customer Transcript FROM Complaints WHERE CustomerTranscript like '%defective product%'


Answer: A
Explanation:


QUESTION 188
You run the following Transact-SQL statements:
You need to create a query that returns the total number of attendees for each combination of CourseID, CourseDate, and the following locations: Lisbon, London, and Seattle. The result set should resemble the following
Which Transact-SQL code segment should you run?


A. SELECT *
FROM CourseParticipants
PIVOT(SUM(NumParticipants) FOR LocationDescription
IN (Lisbon, London, Seattle))
B. SELECT *
FROM CourseParticipants
PIVOT(SUM(NumParticipants) FOR LocationDescription
IN (Lisbon, London, Seattle)) as PVTTable
C. SELECT *
FROM CourseParticipants
UNPIVOT(SUM(NumParticipants) FOR LocationDescription
IN (Lisbon, London, Seattle)
D. SELECT *
FROM CourseParticipants
UNPIVOT(SUM(NumParticipants) FOR LocationDescription
IN (Lisbon, London, Seattle) AS PVTTable


Answer: B
Explanation:


QUESTION 189
You have a project management application. The application uses a Microsoft SQL Server database to store data. You are developing a software bug tracking add-on for the application.
The add-on must meet the following requirements:
- Allow case sensitive searches for product.
- Filter search results based on exact text in the description.
- Support multibyte Unicode characters.
You run the following Transact-SQL statement:

Users connect to an instance of the bug tracking application that is hosted in New York City. Users in Seattle must be able to display the local date and time for any bugs that they create.
You need to ensure that the DateCreated column displays correctly.
Which Transact-SQL statement should you run?


A. SELECT Id,Product,
DateCreated AT TIME ZONE 'Pacific Standard Time'
FROM Bug
B. SELECT Id,Product,
DATEADD(hh, -8, DateCreated)
FROM Bug
C. SELECT Id,Product,
TODATETIMEOFFSET(DateCreated, -8)
FROM Bug
D. SELECT Id,Product,
CAST(DateCreated AS DATETIMEOFFSET)
FROM Bug


Answer: C
Explanation:


QUESTION 190
SIMULATION
You have a database that includes the following tables. All of the tables are in the Production schema.

You need to create a query that returns a list of product names for all products in the Beverages category.
Construct the query using the following guidelines:
- Use the first letter of the table name as the table alias.
- Use two-part column names.
- Do not surround object names with square brackets.
- Do not use implicit joins.
- Do not use variables.
- Use single quotes to surround literal values.
Part of the correct Transact-SQL has been provided in the answer area below. Enter the code in the answer area that resolves the problem and meets the stated goals or requirements. You can add code within the code that has been provided as well as below it.


A. See below explanation

Answer: A
Explanation:


QUESTION 191
Note: This question is part of a series of questions that use the same or similar answer choices. An answer choice may be correct for more than one question in the series. Each question is independent of the other questions in this series. Information and details provided in a question apply only to that question.
You have a table named Person that contains information about employees. Users are requesting a way to access specific columns from the Person table without specifying the Person table in the query statement. The columns that users can access will be determined when the query is running against the data. There are some records that are restricted, and a trigger will evaluate whether the request is attempting to access a restricted record.
You need to ensure that users can access the needed columns while minimizing storage on the database server.
What should you implement?


A. the COALESCE function
B. a view
C. a table-valued function
D. the TRY_PARSE function
E. a stored procedure
F. the ISNULL function
G. a scalar function
H. the TRY_CONVERT function


Answer: B
Explanation:

https://docs.microsoft.com/en-us/sql/t-sql/statements/create-view-transact-sql?view=sql-server-2017

1.|2018 Latest 70-761 Exam Dumps (PDF & VCE) 200Q&As Download:

https://www.braindump2go.com/70-761.html

2.|2018 Latest 70-761 Exam Questions & Answers Download:

https://drive.google.com/drive/folders/0B75b5xYLjSSNZG9yTW9reVdkZG8?usp=sharing
 

danijons

Banned
Banned
Joined
Dec 3, 2018
Messages
303
Reaction score
37
Points
18
Thanks "AdelmoRichard", for sharing this valid study source. Comprehensive and exam-oriented exam practice questions pdf.
 
Top