2018 Latest 70-743 Real Dumps with PDF and VCE! (Updated 11th/Feb/2018)

Elsa Kong

Jan 12, 2018
Reaction score
2018-2-11 New Microsoft 70-743 Exam Dumps with PDF and VCE Free Updated Today! Following are some new Real 70-743 Exam Questions:

You have an Active Directory forest that contains 30 servers and 6,000 Client computers.
You deploy a new DHCP server that runs Windows Server 2016.
You need to retrieve the list of the authorized DHCP servers.
Which command should you run?
A. Get-DHCPServerDatabase
B. Netstat -p IP -s -a
C. Get-DHCPServerInDc
D. Show-ADAuthenticationPolicyExpression -AllowedToAuthenticateTo
Answer: C
To get all authorized DHCP servers in Active Directory, you can use the following PowerShell cmdlet: Get-DhcpServerinDC
Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution. Determine whether the solution meets the stated goals.
Refer to exhibit: Server1 has two virtual machines named VM1 and VM that run Windows Server 2016. VM1 connects to Private VM2 has two network adapters.
You need to ensure that VM1 connects to the corporate network by using NAT.
Solution: You connect VM1 to Internal1. You run the New-NetNatIpAddress and the New- NetNat cmdlets on Server1. You configure VM1 to use VM2 as the default gateway.
Does this meet the goal?
A. Yes
B. No
Answer: A
You have a Hyper-V server named Server1 that runs Windows Server 2016. Server1 has an IP address of Server1 has a container named Container1 that hosts a web application on port 84. Container1 has an IP address of Container1 has a port mapping from port 80 on Server1 to port 84 on Container1. You have a server named Server2 that has an IP address of You need to connect to the web application from Server2.
To which IP address and port should you connect?
Answer: A
You have a server named Server1 that runs Windows Server 2016. Server1 has the DHCP Server and the Windows Deployment Service server roles installed.
Server1 is located on the same subnet as client computers.
You need to ensure that clients can perform a PXE boot from Server1.
Which two IPv4 options should you configure in DHCP? Each correct answer presents part of the solution.
A. 003 Router
B. 066 Boot Server Host Name
C. 015 DNS Domain Name
D. 006 DNS Servers
E. 060 Option 60
Answer: BE
You network contains an Active Directory domain named contoso.com. The domain contains an Active Directory Federation Services (AD FS) server named ADFS1, a Web Application Proxy server named WAP1, and a web server named Web1.
You need to publish a website on Web1 by using the Web Application Proxy. Users will authenticate by using OAuth2 preauthentication.
What should you do first?
A. On Web1, add site bindings.
B. On Web1, add handler mappings.
C. On ADFS1, enable an endpoint.
D. On ADFS1, add a claims provider trust.
Answer: D
You have a server named Server1 that runs Windows Server 2016. Server1 has the Containers feature installed.
You create a text file that contains the commands that will be used to automate the creation of new containers.
You need to ensure that the commands in the text file are used when you create new containers.
What should you name the file?
A. Bootstrap.ini
B. Config.ini
C. Dockerfile
D. Unattend.txt
Answer: C
Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some question sets might have more than one correct solution, white others might not have a correct solution.
You have a server named Server1 that runs Windows Server 2016. Server1 hosts a line-of- business application named App1. App1 has a memory leak that occasionally causes the application to consume an excessive amount of memory.
You need to log an event in the Application event log whenever App1 consume more than 4 GB of memory.
Solution: You create a performance counter data collector.
Does this meet the goal?'
A. Yes
B. No
Answer: A
You have a server that runs Windows Server 2016.
The server contains a storage pool named Pool1. Pool1 contains five physical disks named Disk1, Disk2, Disk3, Disk4, and Disk5.
A virtual disk named VirtualDisk1 is stored in Pool1.
VirtualDisk1 uses the parity storage layout.
Disk3 fails.
You need to remove Disk3 from Pool1.
Which two commands should you run? Each correct answer presents part of the solution.
A. Update-StoragePool 璅riendlyName Pool1
B. Set-ResiliencySetting 璖toragePool Pool1 璓hysicalDiskRedundancyDefault 4
C. Reset-PhysicalDisk 璅riendlyName Disk3
D. Remove-PhysicalDisk 璅riendlyName Disk3
E. Set-PhysicalDisk 璅riendlyName Disk3 璘sage Retired
Answer: DE
You have an IP Address Management (IPAM) deployment that is used to manage all of the DNS servers on your network. IPAM is configured to use Group Policy provisioning.
You discover that a user adds a new mail exchanger (MX) record to one of the DNS zones.
You want to identify which user added the record.
You open Event Catalog on an IPAM server, and you discover that the most recent event occurred yesterday. You need to ensure that the operational events in the event catalog are never older than one hour.
What should you do?
A. From the properties on the DNS zone, modify the refresh interval.
B. From an IPAM_DNS Group Policy object (GPO), modify the Group Policy refresh interval.
C. From Task Scheduler, modify the Microsoft\Windows\IPAM\Audit task.
D. From Task Scheduler, create a scheduled task that runs the Update-IpamServer cmdlet.
Answer: A
You have a Windows Server 2016 failover cluster that contains two servers named Server1 and Server2.
The Cluster Service on Server1 fails.
You need to identify the cause of the failure.
What should you do?
A. From Event Viewer, review the Application event log.
B. From Event Viewer, review the System event log.
C. From Windows PowerShell, run the Get-ClusterLog cmdlet.
D. From Windows PowerShell, run the Get-ClusterNode cmdlet.
Answer: B
You have a container host named Server1 that runs Windows Server 2016.
You need to start a Hyper-V container on Server1.
Which parameter should you use with the docker run command?
A. --runtime
B. --entrypoint
C. --privileged
D. --isolation
E. --expose
Answer: D

1.2018 New 70-743 Exam Dumps (PDF and VCE)Share:
2.2018 New 70-743 Exam Questions & Answers PDF:

Scot Wills

Jun 28, 2018
Reaction score
I pass the 70-743 exam recently and I was very thankful to braindumpspdf. I got 92% marks. I prepare this exam from latest 70-743 practice exam questions. This rehearsal is the best way to evaluate your preparation. I am sure you will pass your exam on the first attempt. Best of luck.


Sep 3, 2018
Reaction score
I was preparing for my MCSA exam when a friend suggested me to use these questions and answers for a definite success. feel pleasure while sharing such a successful and amazing experience with Microsoft 70-743 Dumps. I downloaded these dumps from Realexamdumps.com with money back surety. I say thanks to the experts who have done a very sincere effort on dumps material. I am happy for my selection and thankful to my friend who helped me in this way. I can advise all other after using 70-743 online test engine assist me a lot while my preparation. There is no such material for preparation.


Jun 23, 2019
Reaction score
To pass Microsoft 70-743 exam is no more dream. Now Microsoft students don’t need to burn midnight all to pass Microsoft 70-743 exam. Just visit Exams4Sale and get material from Microsoft 70-743 Expert.Get 35% discount by using promocode 35%OFF. Exams4Sale offers more relevant and upto date material for Microsoft exam dumps so the material is 100% accurate that’s why I recommend you this site for your Microsoft 70-743 exam on the basic of above mentioned qualities. So light up your lamp of success by visiting the link below: