2018 Version 70-743 Exam Dumps (PDF & VCE) Just Updated!

2018 May New Microsoft 70-743 Exam Dumps with PDF and VCE Just Updated Today! Following are some new 70-743 Real Exam Questions:

QUESTION 109
Note: This question is part of a series of questions that use the same or similar answer choices. An answer choice may be correct for more than one question in the series. Each question is independent of the other questions in this series. Information and details provided in a question apply only to that question.
You have two servers named Server1 and Server2 that run Windows Server 2016.
Server1 and Server2 have the Hyper-V server role installed and are nodes in a failover cluster.
On Server1, an administrator creates a virtual machine named VM1.
You need to configure VM1 for high availability.
Which tool should you use?

A. the clussvc.exe command
B. the cluster.exe command
C. the Computer Management snap-in
D. the configurehyperv.exe command
E. the Disk Management snap-in
F. the Failover Cluster Manager snap-in
G. the Hyper-V Manager snap-in
H. the Server Manager app

Answer: F
Explanation:

Dear visitor, you need to Register or Login to view links on Certify Chat.

QUESTION 110
Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some question sets might have more than one correct solution, while others might not have a correct solution.
After you answer a question in this section, you will NOT be able to return to it. As a result, these questions will not appear in the review screen.
Your network contains an Active Directory forest named contoso.com.
You need to identify which server is the schema master.
Solution: You open Active Directory Users and Computers, right-click contoso.com in the console tree, and then click Operations Master.
Does this meet the goal?

A. Yes
B. No

Answer: B
Explanation:
This solution only shows the domain FSMO roles, not the forest FSMO roles.
References:

Dear visitor, you need to Register or Login to view links on Certify Chat.

QUESTION 111
Note: This question is part of a series of questions that use the same or similar answer choices. An answer choice may be correct for more than one question in the series. Each question is independent of the other questions in this series. Information and details provided in a question apply only to that question.
Your network contains Windows and non-Windows devices.
You have a DHCP server named Server1 that has an IPv4 scope named Scope1.
You need to prevent a client computer that uses the same name as an existing registration from updating the registration.
What should you do?

A. From the properties of Scope1, modify the Conflict detection attempts setting.
B. From the properties of Scope1, configure Name Protection.
C. From the properties of IPv4, configure the bindings.
D. From IPv4, create a new filter.
E. From the properties of Scope1, create an exclusion range.
F. From IPv4 run the DHCP Policy Configuration Wizard.
G. From Control Panel, modify the properties of Ethernet.
H. From Scope1, create a reservation.

Answer: B

QUESTION 112
Your network contains an Active directory forest named contoso.com.
The forest has a Distributed File System (DFS) namespace named \\contoso.com\namespace1.
The domain contains a file server named Server1 that runs Windows Server 2016.
You create a folder named Folder1 on Server1.
Which two cmdlets should you use? Each correct answer presents part of the solution. NOTE: Each correct selection is worth one point.

A. New-DfsnFolderTarget
B. Install-WindowsFeature
C. Grant-DfsnAccess
D. New-DfsnFolder
E. New-SmbShare

Answer: BC

QUESTION 113
You need to implement network virtualization.
On which object should you configure the virtual subnet ID?

A. Virtual switch
B. Hyper-V server
C. VM
D. Virtual network adapter

Answer: A

QUESTION 114
You have a server named Server1 that runs Windows Server 2016.
Server1 has two network cards. One network card connects to your internal network and the other network card connects to the Internet.
You plan to use Server1 to provide Internet connectivity for client computers on the internal network.
You need to configure Server1 as a network address translation (NAT) server.
Which server role or role service should you install on Server1 first?

A. Network Controller
B. Web Application Proxy
C. Routing
D. DirectAccess and VPN (RAS)

Answer: C

QUESTION 115
Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution. Determine whether the solution meets the stated goals.
Your network contains an Active Directory domain named contoso.com.
The domain contains a DNS server named Server1. All client computers run Windows 10.
On Server1, you have the following zone configuration.

You need to ensure that all of the client computers in the domain perform DNSSEC validation for the fabrikam.com namespace.
Solution: From Windows PowerShell on Server1, you run the Add-DnsServertrustAnchor cmdlet.
Does this meet the goal?

A. Yes
B. No

Answer: B
Explanation:
The Add-DnsServerTrustAnchor command adds a trust anchor to a DNS server. A trust anchor (or trust "point") is a public cryptographic key for a signed zone. Trust anchors must be configured on every non-authoritative DNS server that will attempt to validate DNS data. Trust Anchors have no direct relation to DSSEC validation.
References:

Dear visitor, you need to Register or Login to view links on Certify Chat.

Dear visitor, you need to Register or Login to view links on Certify Chat.

QUESTION 116
You have a server named Server1 that runs Windows Server 2016.
The disk configuration for Server1 is shown in the exhibit. (Click the Exhibit button.)

You add Server1 to a cluster.
You need to ensure that you can use Disk 1 for Storage Spaces Direct.
What should you do first?

A. Set Disk 1 to offline.
B. Convert Partition (E to ReFS.
C. Convert Disk 1 to a dynamic disk.
D. Delete Partition (E.

Answer: D
Explanation:
The disks used in Storage Spaces Direct cannot contain existing partitions.

QUESTION 117
You create a Nano server image named Nano1.vhdx by using the New-NanoServerImage cmdlet.
You attach Nano1.vhdx to a Generation 1 virtual machine named Nano1.
When you start Nano1, you get the following error message:
"Boot failure. Reboot and select proper Boot device or Insert Boot Media in selected Boot device"
You need to successfully start Nano server.
What should you do?

A. Attach Nano1.vhdx to a SCSIcontroller.
B. Recreate Nano1 as a Generation 2 virtual machine.
C. Increase the memory of Nano1 to 512 Mb.
D. Modify the BIOS settings of Nano1.

Answer: B
Explanation:
A Generation 1 VM cannot boot from a vhdx disk; only a Generation 2 VM can boot from an vhdx disk.

QUESTION 118
You have a Hyper-V host named Server1 that runs Windows Server 2016.
The host has two virtual machines (VMs) named VM1 and VM2.
On the Hyper-V host, you create two virtual disks named Disk1 and Disk2.
You plan to create a test environment for Storage Spaces Direct.
You need to configure the VMs to connect to the virtual disks.
What should you use?

A. An iSCSI target
B. A virtual SCSI controller
C. A virtual fibre channel adapter
D. A virtual IDE controller

Answer: B
Explanation:

Dear visitor, you need to Register or Login to view links on Certify Chat.

QUESTION 119
You have two servers named Server1 and Server2 that run Windows Server 2016.
You plan to implement Storage Replica to replicate the contents of volumes on Server1 to Server2.
You need to ensure that the replication traffic between the servers is limited to a maximum of 100 Mbps.
Which cmdlet should you run?

A. Set-NetUDPSetting
B. New-StorageQosPolicy
C. Set-SmbBandwidthLimit
D. Set-NetTCPSetting

Answer: C

1.|2018 Latest 70-743 Exam Dumps (PDF & VCE) Download:

Dear visitor, you need to Register or Login to view links on Certify Chat.

2.|2018 Latest 70-743 Exam Questions & Answers Download:

Dear visitor, you need to Register or Login to view links on Certify Chat.