New 70-741 Dumps With VCE and PDF for Passing '2018 70-741 Exam

Discussion in '70-741' started by Hector Garrity, Dec 26, 2017.

  1. Hector Garrity

    Member

    Joined:
    Aug 8, 2016
    Messages:
    86
    Likes Received:
    1
    ATTENTION PLEASE!!! THE 70-741 EXAM UPDATED RECENTLY (Aug/2018) WITH MANY NEW QUESTIONS!!!

    And, PassLeader has updated its 70-741 dumps recently, all new questions available now!!!

    You can get the newest PassLeader 70-741 exam questions in the
    #2 of this topic!!!

    -->

    Dear visitor, you need to Register or Login to view links on Certify Chat.



    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

    The new 70-741 dumps (Dec/2017 Updated) now are available, here are part of 70-741 exam questions (FYI):


    [Get the download link at the end of this post]

    NEW QUESTION 123
    You have a server named Server1 that runs Windows Server 2016. Server1 has the DHCP Server and the Windows Deployment Service server roles installed. Server1 is located on the same subnet as client computers. You need to ensure that clients can perform a PXE boot from Server1. Which two IPv4 options should you configure in DHCP? (Each correct answer presents part of the solution. Choose two.)

    A. 003 Router
    B. 066 Boot Server Host Name
    C. 015 DNS Domain Name
    D. 006 DNS Servers
    E. 060 Option 60

    Answer: BE

    NEW QUESTION 124
    You network contains an Active Directory domain named contoso.com. The domain contains a member server named Server1 that runs Windows Server 2016 and has the DNS Server role installed. Automatic scavenging of state records is enabled and the scavenging period is set to 10 days. All client computers dynamically register their names in the contoso.com DNS zone on Server1. You discover that the names of multiple client computers that were removed from the network several weeks ago can still be resolved. You need to configure Server1 to automatically remove the records of the client computers that have been offline for more than 10 days.
    Solution: You set the Expires after value of the zone.
    Does this meet the goal?

    A. Yes
    B. No

    Answer: B

    NEW QUESTION 125
    You have an IP Address Management (IPAM) server named IPAM1 that runs Windows Server 2016. IPAM1 manages 10 DHCP servers. You need to provide a user with the ability to track which clients receive which IP addresses from DHCP. The solution must minimize administrative privileges.

    A. IPAM MSM Administrators
    B. IPAM ASM Administrators
    C. IPAM IP Audit Administrators
    D. IPAM User

    Answer: A

    NEW QUESTION 126
    You are implementing a new network. The network contains a DHCP server named DHCP1 that runs Windows Server 2016. DHCP1 contains a scope named Scope1 for the 192.168.0/24 subnet. Your company has the following policy for allocating IP addresses:
    - All server addresses must be excluded from DHCP scopes.
    - All client computer must receive IP addresses from Scope1.
    - All Windows servers must have IP addresses in the range of 192.168.0.200 to 192.168.0.240.
    - All other network devices must have IP addresses in the range of 192.168.0.180 to 192.168.0.199.
    You deploy a print device named Print1. You need to ensure that Print1 adheres to the policy for allocating IP addresses. Which command should you use?

    A. Add-DhcpServerv4Lease
    B. Add-DhcpServerv4ExclusionRange
    C. Add-DhcpServerv4Filter
    D. Add-DhcpServerv4Reservation

    Answer: B

    NEW QUESTION 127
    You have an Active Directory forest that contains 30 servers and 6,000 Client computers. You deploy a new DHCP server that runs Windows Server 2016. You need to retrieve the list of the authorized DHCP servers. Which command should you run?

    A. Get-DHCPServerDatabase
    B. Netstat -p IP -s -a
    C. Get-DHCPServerInDc
    D. Show-ADAuthenticationPolicyExpression-AllowedToAuthenticateTo

    Answer: C
    Explanation:
    To get all authorized DHCP servers in Active Directory, you can use the following PowerShell cmdlet: Get-DhcpServerinDC.

    NEW QUESTION 128
    You have a DHCP server named Server1. Server1 has an IPv4 scope that contains 100 addresses for a subnet named Subnet! Subnet1 provides guest access to the Internet. There are never more than 20 client computers on Subnet1 simultaneously; however, the computers that connect to Subnet 1 are rarely the same computers. You discover that some client computers are unable to access the network. The computers that have the issue have IP addresses in the range of 169.254.0.0/16. You need to ensure that all of the computers can connect successfully to the network to access the Internet. What should you do?

    A. Create a new scope that uses IP addresses in the range of 169.254.0.0/16.
    B. Modify the scope options.
    C. Modify the lease duration.
    D. Configure Network Access Protection (NAP) integration on the existing scope.

    Answer: A

    NEW QUESTION 129
    You have a Hyper-V server named Server1 that runs Windows Server 2016. Server1 has an IP address of 192.168.1.78. Server1 has a container named Container1 that hosts a web application on port 84. Container1 has an IP address of 172.16.5.6. Container1 has a port mapping from port 80 on Server1 to port 84 on Container1. You have a server named Server2 that has an IP address of 192.168.1.79. You need to connect to the web application from Server2. To which IP address and port should you connect?

    A. 172.16.5.6:80
    B. 192.168.1.78:80
    C. 172.16.5.6:84
    D. 192.168.1.78:84

    Answer: A

    NEW QUESTION 130
    You have a remote access server named Server1 that runs Windows Server 2016. Server1 has DirectAccess enabled. You have a proxy server named Server2. All computers on the internal network connect to the Internet by using the proxy. On Server1, you run the command Set-DAClient -forceTunnel Enabled. You need to ensure that when a DirectAccess client connects to the network, the client accesses all the Internet resources through the proxy. What should you run on Server1?

    A. Set-DnsClientGlobalSetting
    B. Set-DAEntryPoint
    C. Set-DnsClientNrptRule
    D. Set-DnsClientNrptGlobal

    Answer: B

    NEW QUESTION 131
    You have an IP Address Management (IPAM) deployment that is used to manage all of the DNS servers on your network. IPAM is configured to use Group Policy provisioning. You discover that a user adds a new mail exchanger (MX) record to one of the DNS zones. You want to identify which user added the record. You open Event Catalog on an IPAM server, and you discover that the most recent event occurred yesterday. You need to ensure that the operational events in the event catalog are never older than one hour. What should you do?

    A. From the properties on the DNS zone, modify the refresh interval.
    B. From an IPAM_DNS Group Policy object (GPO), modify the Group Policy refresh interval.
    C. From Task Scheduler, modify the Microsoft\Windows\IPAM\Audit task.
    D. From Task Scheduler, create a scheduled task that runs the Update-IpamServer cmdlet.

    Answer: A

    NEW QUESTION 132
    You have a DHCP server named Server1. Server1 has an IPv4 scope that serves 75 client computers that run Windows 10. When you review the address leases in the DHCP console, you discover several leases for devices that you do not recognize. You need to ensure that only the 75 Windows 10 computers can obtain a lease from the scope. What should you do?

    A. Run the Add-DhcpServerv4ExclusionRange cmdlet.
    B. Create and enable a DHCP filter.
    C. Create a DHCP policy for the scope.
    D. Run the Add-DhcpServerv4OptionDefinition cmdlet.

    Answer: C

    NEW QUESTION 133
    ......

    Get the newest PassLeader 70-741 VCE dumps here:

    Dear visitor, you need to Register or Login to view links on Certify Chat.



    OR

    Download more NEW PassLeader 70-741 PDF dumps from Google Drive here:

    Dear visitor, you need to Register or Login to view links on Certify Chat.



    OR

    Read the newest PassLeader 70-741 exam questions from this Blog:

    Dear visitor, you need to Register or Login to view links on Certify Chat.



    Good Luck!!!
     
    #1 Hector Garrity, Dec 26, 2017
    Last edited: Aug 8, 2018
  2. Hector Garrity

    Member

    Joined:
    Aug 8, 2016
    Messages:
    86
    Likes Received:
    1
    The new 70-741 dumps (Aug/2018 Updated) now are available, here are part of 70-741 exam questions (FYI):

    [Get the download link at the end of this post]

    NEW QUESTION 189
    You have Hyper-V host named Server1. Serve1 has a network adapter that has virtual machine queue (VMQ) enabled. The network adapter connects at 10 Gbps and has an IPv4 address. Server1 hosts a virtual machine named VM1. VM1 has a single network adapter and four processors. You need to distribute the network processing load across the VM1 processors. What should you do?

    A. From Device Manager on Server1, configure TCP Checksum Offload (IPv4).
    B. From Windows PowerShell on VM1, run the Enable-NetAdapterRSS cmdlet.
    C. From Windows PowerShell on Server1, run the Enable-NetAdapterPacketDirect cmdlet.
    D. From Windows PowerShell on VM1, run the Enable-NetAdapterPacketDirect cmdlet.

    Answer: B

    NEW QUESTION 190
    Your network contains an Active Directory domain named contoso.com. The domain contains a Hyper-V host. You are deploying Software Defined Network (SDN) by using Windows Server 2016. You deploy a virtual machine that runs Windows Server 2016, and you install the Network Controller server role. You need to configure the virtual machine as the network controller. What should you do?

    A. Run the Install-NetworkControllerCluster cmdlet and set ClientAuthentication to X509.
    B. Run the Install-NetworkController cmdlet and set ClientAuthentication to None.
    C. Run the Install-NetworkControllerCluster cmdlet and set ClientAuthentication to None.
    D. Run the Install-NetworkController cmdlet and set ClientAuthentication to Kerberos.

    Answer: D

    NEW QUESTION 191
    Your company has five departments, including a web research department. You have a DHCP server named Server1 and two DNS servers named DNS1 and DNS2. Server1 has an IPv4 scope named Scope1. All client computers are configured to use DNS1 for name resolution. You need to ensure that users in the web research department use DNS2 for name resolution. What should you do on Server1?

    A. From the properties of Scope1, modify the Conflict detection attempts setting.
    B. From the properties of Scope1, configure Name Protection.
    C. From the properties of IPv4, configure the bindings.
    D. From IPv4, create a new filter.
    E. From the properties of Scope1, create an exclusion range.
    F. From IPv4, run the DHCP Policy Configuration Wizard.
    G. From Control Panel, modify the properties of Ethernet.
    H. From Scope1, create a reservation.

    Answer: A

    NEW QUESTION 192
    You have an IP Address Management (IPAM) server named Server1 that runs Windows Server 2016. You have five DHCP servers. Server1 manages all of the DHCP servers. On Server1, an administrator uses Purge Event Catalog Data to remove all of the events from the last 30 days. You need to view all of these lease requests that were denied during the last two days. What should you do?

    A. On each DHCP server, run the \Microsoft\Windows\Server Manager\CleanUpOldPerfLogs scheduled task, and then review the event catalog on Server1.
    B. On Server1, run the Purge Event Catalog Data action and then open Event Viewer on Server1.
    C. Review the log data in C:\Windows\System32\ipam\Database on Server1.
    D. On each DHCP server, review the DHCP Server operational event log.

    Answer: C

    NEW QUESTION 193
    You have a server named Server1 that runs Windows Server 2016. Server1 is an IP Address Management (IPAM) server that collects DHCP and DNS logs and events for your entire network. You need to get the IP addresses that were assigned to a client computer named Computer1 during the last week. What should you do on Server1?

    A. Open Event Viewer and click Windows Logs. Filter the Forwarded Events log for Computer1.
    B. Open Event Viewer and click Windows Logs. Filter the Security log for Computer1.
    C. Run the Get-IpamAddress cmdlet.
    D. Run the Get-IpamIpAddressAuditEvent cmdlet.

    Answer: D

    NEW QUESTION 194
    You are implementing a secure network. The network contains a DHCP server named Server1 that runs Windows Server 2016. You create a DHCP allow filter that contains all of the computers on the network that are authorized to receive IP addresses. You discover that unauthorized computers can receive an IP address from Server1. You need to ensure that only authorized computers can receive an IP address from Server1.
    Solution: You run the following command:
    Set-DhcpServerv4FilterList –ComputerName Server1 –Allow False –Deny True
    Does this meet the goal?

    A. Yes
    B. No

    Answer: B

    NEW QUESTION 195
    You are implementing a secure network. The network contains a DHCP server named Server1 that runs Windows Server 2016. You create a DHCP allow filter that contains all of the computers on the network that are authorized to receive IP addresses. You discover that unauthorized computers can receive an IP address from Server1. You need to ensure that only authorized computers can receive an IP address from Server1.
    Solution: You run the following command:
    Add-DHCPServer4Filter –ComputerName Server1 –MacAddress * -List Allow
    Does this meet the goal?

    A. Yes
    B. No

    Answer: A

    NEW QUESTION 196
    You are implementing a secure network. The network contains a DHCP server named Server1 that runs Windows Server 2016. You create a DHCP allow filter that contains all of the computers on the network that are authorized to receive IP addresses. You discover that unauthorized computers can receive an IP address from Server1. You need to ensure that only authorized computers can receive an IP address from Server1.
    Solution: You run the following command:
    Add-DHCPServer4Filter –ComputerName Server1 –MacAddress * -List Deny
    Does this meet the goal?

    A. Yes
    B. No

    Answer: B

    NEW QUESTION 197
    You have an IP Address Management (IPAM) server named IPAM1 that runs Windows Server 2016. IPAM1 manages all of the DHCP servers on your network. You are troubleshooting an issue for a client that fails to receive an IP address from DHCP. You need to ensure that from IPAM1, you can view all of the event data for the DHCP leases from the last 24 hours.
    Solution: From Windows PowerShell, you run the Invoke-IpamServerProvisioning cmdlet.
    Does this meet the goal?

    A. Yes
    B. No

    Answer: B

    NEW QUESTION 198
    You have an IP Address Management (IPAM) server named IPAM1 that runs Windows Server 2016. IPAM1 manages all of the DHCP servers on your network. You are troubleshooting an issue for a client that fails to receive an IP address from DHCP. You need to ensure that from IPAM1, you can view all of the event data for the DHCP leases from the last 24 hours.
    Solution: From Windows PowerShell, you run the Set-IpamDHCPServer cmdlet.
    Does this meet the goal?

    A. Yes
    B. No

    Answer: B

    NEW QUESTION 199
    You have an IP Address Management (IPAM) server named IPAM1 that runs Windows Server 2016. IPAM1 manages all of the DHCP servers on your network. You are troubleshooting an issue for a client that fails to receive an IP address from DHCP. You need to ensure that from IPAM1, you can view all of the event data for the DHCP leases from the last 24 hours.
    Solution: From Server Manager, you run Retrieve Event Catalog Data.
    Does this meet the goal?

    A. Yes
    B. No

    Answer: A

    NEW QUESTION 200
    You implement Software Defined Networking (SDN) by using the Network Controller server role. You have a virtual network named VNET1 that contains servers used by developers. You need to ensure that only devices from the 192.168.0.0/24 subnet can access the virtual machine in VNET1. What should you configure?

    A. a network security group (NSG)
    B. role-based access control
    C. a universal security group
    D. Dynamic Access Control

    Answer: A

    NEW QUESTION 201
    You have a virtual machine named Server1 that runs Windows Server 2016. You plan to use Server1 as part of a Software Defined Networking (SDN) solution. You need to implement the Border Gateway Protocol (BGP) on Server1. What should you install?

    A. the Peer Name Resolution Protocol (PNRP) feature
    B. the Routing role service
    C. the Network Device Enrollment Service role service
    D. the Network Policy and Access Services server role

    Answer: B

    NEW QUESTION 202
    Hotspot
    You have a Nano Server that has one network interface. The server is configured to obtain an IP address automatically. You need to configure the server to have the following IP configurations:
    - IP address: 172.16.3.100
    - Default gateway: 172.16.3.1
    - Subnet mask: 255.255.255.0
    What command should you run? (To answer, select the appropriate options in the answer area.)

    [​IMG]

    Answer:
    [​IMG]

    NEW QUESTION 203
    Drag and Drop
    You have a server named Server1 that runs Windows Server 2016. You need to deploy the first node cluster of a Network Controller cluster. Which four cmdlets should you run in sequence? (To answer, move the appropriate cmdlets from the list of cmdlets to answer area and arrange them in the correct order.)

    [​IMG]

    Answer:
    [​IMG]

    NEW QUESTION 204
    ......

    Get the newest PassLeader 70-741 VCE dumps here:

    Dear visitor, you need to Register or Login to view links on Certify Chat.



    OR

    Download more NEW PassLeader 70-741 PDF dumps from Google Drive here:

    Dear visitor, you need to Register or Login to view links on Certify Chat.



    OR

    Read the newest PassLeader 70-741 exam questions from this Blog:

    Dear visitor, you need to Register or Login to view links on Certify Chat.



    Good Luck!!!
     
  3. Vorryn

    Vorryn Member
    Member

    Joined:
    May 31, 2018
    Messages:
    3
    Likes Received:
    1
    This forum section is just a huge ad for the respective sites that sell the dumps.
    Please stop that. Share the full dumps.

    Thank you.
     
    Ancy likes this.

Share This Page