2019 Version 70-741 Dumps with VCE and PDF

Hector Garrity

Member
Member
Joined
Aug 8, 2016
Messages
94
Reaction score
4
Points
8
ATTENTION PLEASE!!! THE 70-741 EXAM UPDATED RECENTLY (Mar/2019) WITH MANY NEW QUESTIONS!!!

And, Pass Leader has updated its 70-741 dumps recently, all new questions available now!!!

249Q NEW Version!!!

You can get the newest Pass Leader 70-741 exam questions in the
#11 of this thread!!!

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

ATTENTION PLEASE!!! THE 70-741 EXAM UPDATED RECENTLY (Oct/2018) WITH MANY NEW QUESTIONS!!!

And, Pass Leader has updated its 70-741 dumps recently, all new questions available now!!!

You can get the newest Pass Leader 70-741 exam questions in the
#10 of this topic!!!

--> #10 of this topic


~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

ATTENTION PLEASE!!! THE 70-741 EXAM UPDATED RECENTLY (Aug/2018) WITH MANY NEW QUESTIONS!!!

And, Pass Leader has updated its 70-741 dumps recently, all new questions available now!!!

You can get the newest Pass Leader 70-741 exam questions in the
#7 of this topic!!!

--> #7 of this topic


~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

ATTENTION PLEASE!!! THE 70-741 EXAM UPDATED RECENTLY (Dec/2017) WITH MANY NEW QUESTIONS!!!

You can get the newest 70-741 questions in the #3 of this topics!!!

--> #3 of this topics

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

ATTENTION PLEASE!!! THE 70-741 EXAM UPDATED RECENTLY (Nov/2017) WITH MANY NEW QUESTIONS!!!

You can get the newest 70-741 questions in the
#2 of this topics!!!

--> #2 of this topics


~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

The new 2017 version 70-741 dumps now are available, here are part of 70-741 exam questions (FYI) [Get the download link at the end of this post]:

NEW QUESTION 1
You network contains an Active Directory domain named contoso.com. The domain contains a DHCP server named Server1. All client computers run Windows 10 and are configured as DHCP clients. Your helpdesk received calls today from users who failed to access the network from their Windows 10 computer. You open the DHCP console as shown in the exhibit:
You need to ensure that all of the Windows 10 computers can receive a DHCP lease.
Solution: You activate the scope.
Does this meet the goal?

A. Yes
B. No

Answer: A

NEW QUESTION 2
Your network contains an Active Directory domain named contoso.com. The domain contains a DNS server named Server1. All client computers run Windows 10. On Server1, you have the following zone configuration:
You have the following subnets defined on Server1:
You need to prevent Server1 from resolving queries from DNS clients located on Subnet4. Server1 must resolve queries from all other DNS clients.
Solution: From Windows Firewall with Advanced Security on Server1, you create an inbound rule.
Does this meet the goal?

A. Yes
B. No

Answer: B

NEW QUESTION 3
You network contains an Active Directory domain named contoso.com. The domain contains a member server named Server1 that runs Windows Server 2016 and has the DNS Server role installed. Automatic scavenging of state records is enabled and the scavenging period is set to 10 days. All client computers dynamically register their names in the contoso.com DNS zone on Server1. You discover that the names of multiple client computers that were removed from the network several weeks ago can still be resolved. You need to configure Server1 to automatically remove the records of the client computers that have been offline for more than 10 days.
Solution: You run the dnscmd.exe command and specify the /AgeAllRecords parameter for the zone.
Does this meet the goal?

A. Yes
B. No

Answer: B

NEW QUESTION 4
Hotspot
You network contains an Active Directory named contoso.com. The domain contains two servers named Server1 and Server2 that run Windows Server 2016. Server1 has IP Address Management (IPAM) installed. Server2 has the DHCP Server role installed. The IPAM server retrieves data from Server2. The domain has two users named User1 and User2 and a group named Group1. User1 is the only member of Group1. Server1 has one IPAM access policy. You edit the access policy as shown in the Policy exhibit:
The DHCP scopes are configured as shown in the Scopes Exhibit:
For each of the following statements, select Yes if the statement is true. Otherwise, select No.

Answer:

NEW QUESTION 5
You have a DHCP server named Server1 that has three network cards. Each network card is configured to use a static IP address. Each network card connects to a different network segment. Server1 has an IPv4 scope named Scope1. You need to ensure that Server1 only uses one network card when leasing IP addresses in Scope1. What should you do?

A. From the properties of Scope1, modify the Conflict detection attempts setting.
B. From the properties of Scope1, configure Name Protection.
C. From the properties of IPv4, configure the bindings.
D. From IPv4, create a new filter.
E. From the properties of Scope1, create an exclusion range.
F. From IPv4, run the DHCP Policy Configuration Wizard.
G. From Control Panel, modify the properties of Ethernet.
H. From Scope1, create a reservation.

Answer: C

NEW QUESTION 6
You network contains an Active Directory domain named contoso.com. The domain contains a DHCP server named Server1. All client computers run Windows 10 and are configured as DHCP clients. Your helpdesk received calls today from users who failed to access the network from their Windows 10 computer. You open the DHCP console as shown in the exhibit:
You need to ensure that all of the Windows 10 computers can receive a DHCP lease.
Solution: You start the DHCP Server service.
Does this meet the goal?

A. Yes
B. No

Answer: B

NEW QUESTION 7
……

Download more NEW Pass Leader 70-741 PDF dumps from Google Drive here:

https://drive.google.com/open?id=0B-ob6L_QjGLpRUl1Y0xaTTdfTjQ

Good Luck!!!
 
Last edited:

Hector Garrity

Member
Member
Joined
Aug 8, 2016
Messages
94
Reaction score
4
Points
8
The new 70-741 dumps (Nov/2017 Updated) now are available, here are part of 70-741 exam questions (FYI):

[Get the download link at the end of this post]


NEW QUESTION 77
You are deploying a small network that has 30 client computers. The network uses the 192.168.1.0/24 address space. All computers obtain IP configurations from a DHCP server named Server1. You install a server named Server2 that runs Windows Server 2016. Server2 has two network adapters named internal and Internet. Internet connects to an Internet service provider (ISP) and obtains the 131.107.0.10 IP address. Internal connects to the internal network and is configured to use the 192.168.1.250 IP address. You need to provide Internet connectivity for the client computers. What should you do?

A. On Server2, select the Internet and Internal network adapters and bridge the connections.
From the DHCP console on Server1, authorize Server2.
B. On Server1, stop the DHCP server.
On the Internal network adapter on Server 2, enable Internet Connection Sharing (ICS).
C. On Server2 run the New-NetNat -Name NAT1 -InternalIPInterfaceAddressPrefix 192.168.1.0/24 cmdlet.
Configure Server1 to provide the 003 Router option of 131.107.0.10.
D. Install the Routing role service on Server2 and configure the NAT routing protocol.
Configure Server1 to provide the 003 Router option of 192.168.1.250.

Answer: B

NEW QUESTION 79
You have two Hyper-V hosts named Server1 and Server2 that run windows server 2012 R2. The servers are nodes in a failover cluster named Cluster1. You perform a rolling upgrade of the cluster nodes to Windows Server 2016. You need to ensure that you can implement the Virtual Machine Load Balancing feature. Which cmdlet should you use?

A. Update-ClusterFunctionalLevel
B. SetCauClusterRole
C. Update-ClusterNetWorkNameResource
D. Set-ClusterGroupSet

Answer: A

NEW QUESTION 82
You have a DHCP server named Server1 that runs Windows Server 2016. You have a single IP subnet. Server1 has an IPv4 scope named Scope1. Scope1 has an IP address range of 10.0.1.10 to 10.0.1.200 and a length of 24 bits. You need to create a second logical IP network on the subnet. The subnet will use an IP address range of 10.0.2.10 to 10.0.2.200 and a length of 24 bits. What should you do?

A. Create a second scope, and then create a superscope.
B. Create a superscope, and then configure an exclusion range in Scope1.
C. Create a new scope, and then modify the IPv4 bindings.
D. Create a second scope, and then run the DHCP Split-Scope Configuration Wizard.

Answer: A

NEW QUESTION 85
Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some questions sets might have more than one correct solutions, while others might not have a correct solution. After you answer a question in this section, you will NOT be able to return to it. As a result, these questions will not appear in the review screen.
You have a server named Server1 that runs Windows Server 2016. Server1 is configured as a VPN server. Server1 is configured to allow domain users to establish VPN connections from 06:00 to 18:00 everyday of the week. You need to ensure that domain users can establish VPN connections only between Monday and Friday.
Solution: From Active Directory Users and Computers, you modify the Dial-in Properties of the user accounts.
Does this meet the goal?

A. Yes
B. No

Answer: A

NEW QUESTION 86
You have a server named Server1 that runs Windows Server 2016. Server1 has two network cards. One network card connects to your internal network and the other network card connects to the Internet. You plan to use Server1 to provide Internet connectivity for client computers on the internal network. You need to configure Server1 as a network address translation (NAT) server. Which server role or role service should you install on Server1 first?

A. Network Controller
B. Web Application Proxy
C. Routing
D. DirectAccess and VPN (RAS)

Answer: C

NEW QUESTION 87
Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some question sets might have more than one correct solution, while others might not have a correct solution. After you answer a question in this sections, you will NOT be able to return to it. As a result, these questions will not appear in the review screen.
Your network contains an Active Directory domain named contoso.com. You need to create a Nano Server image named Nano1 that will be used as a virtualization host. The Windows Server 2016 source files are located in Drive D.
Solution: You run the following cmdlet:
New-NanoServerImage -Edition Datacenter -DeploymentType Host -Package Microsoft-NanoServer-SCVMM-Package -MediaPath D:\ -TargetPath C:\nano1\Nano1.wim -ComputerName Nano1 -Domainname contoso.com
Does this meet the goal?

A. Yes
B. NO

Answer: A

NEW QUESTION 88
Your network contains an Active directory forest named contoso.com. The forest has a Distributed File System (DFS) namespace named \\contoso.com\namespace1. The domain contains a file server named Server1 that runs Windows Server 2016. You create a folder named Folder1 on Server1. Which two cmdlets should you use? (Choose two.)

A. New-DfsnFolderTarget
B. Install-WindowsFeature
C. Grant-DfsnAccess
D. New-DfsnFolder
E. New-SmbShare

Answer: BC

NEW QUESTION 89
You have a virtual machine named VM1 that runs Windows Server 2016. VM1 hosts a service that requires high network throughput. VM1 has a virtual network adapter that connects to a Hyper-V switch named vSwitch1. vSwitch1 has one network adapter. The network adapter supports Remote Direct Memory Access (RDMA), the single root I/O virtualization (SR-IOV) interface, Quality of Service (QoS), and Receive Side Scaling (RSS). You need to ensure that the traffic from VM1 can be processed by multiple networking processors. Which Windows PowerShell command should you run on the host of VM1?

A. Set-NetAdapterRss
B. Set-NetAdapterRdma
C. Set-NetAdapterQos
D. Set-NetAdapterSriov

Answer: D

NEW QUESTION 90
Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some questions sets might have more than one correct solutions, while others might not have a correct solution. After you answer a question in this section, you will NOT be able to return to it. As a result, these questions will not appear in the review screen.
You have a server named Server1 that runs Windows Server 2016. Server1 is configured as a VPN server. Server1 is configured to allow domain users to establish VPN connections from 06:00 to 18:00 everyday of the week. You need to ensure that domain users can establish VPN connections only between Monday and Friday.
Solution: From Server Manager, You modify the Access Policies on Server1.
Does this meet the goal?

A. Yes
B. No

Answer: A

NEW QUESTION 91
Your network contains three subnets, a production subnet that contains production servers, a development network that contains development servers, and a client network that contains client computers. The development network is used to test applications and reproduces servers that are located on the production network. The development network and the production network use the same IP address range. A developer has a client computer on the client network. The developer reports that when he attempts to connect to the IP address 10.10.1.6 from his computer, he connects to a server on the production network. You need to ensure that when the developer connects to 10.10.1.6, he connects to a sever on the development network. Which cmdlet should you use?

A. New-NetNeighbor
B. New-NetRoute
C. Set-NetTcpSetting
D. Set-NetNeighbir

Answer: B

NEW QUESTION 92
Your network contains an Active Directory forest named contoso.com. The forest has three sites located in London, Paris and Berlin. The London site contains a web server named Web1 that runs Windows Server 2016. You need to configure Web1 as an HTTP content server for the hosted cache servers located in the Paris and Berlin sites.
Solution: You install the BranchCache feature, and then you start the BranchCache service.
Does this meet the goal?

A. Yes
B. No

Answer: B

NEW QUESTION 93
Your network contains Windows and non-Windows devices. You have a DHCP server named Server1 that has an IPv4 scope named Scope1. You need to prevent a client computer that uses the same name as an existing registration from updating the registration. What should you do?

A. From the properties of Scope1, modify the Conflict detection attempts setting.
B. From the properties of Scope1, configure Name Protection.
C. From the properties of IPv4, configure the bindings.
D. From IPv4, create a new filter.
E. From the properties of Scope1, create an exclusion range.
F. From IPv4, run the DHCP Policy Configuration Wizard.
G. From Control Panel, modify the properties of Ethernet.
H. From Scope1, create a reservation.

Answer: F

NEW QUESTION 94
......

Download more NEW Pass Leader 70-741 PDF dumps from Google Drive here:

https://drive.google.com/open?id=0B-ob6L_QjGLpRUl1Y0xaTTdfTjQ

OR

Read the newest Pass Leader 70-741 exam questions from this Blog:

http://www.microsoftbraindumps.com/?s=70-741

Good Luck!!!
 
Last edited:

Hector Garrity

Member
Member
Joined
Aug 8, 2016
Messages
94
Reaction score
4
Points
8
The new 70-741 dumps (Dec/2017 Updated) now are available, here are part of 70-741 exam questions (FYI):

[Get the download link at the end of this post]


NEW QUESTION 123
You have a server named Server1 that runs Windows Server 2016. Server1 has the DHCP Server and the Windows Deployment Service server roles installed. Server1 is located on the same subnet as client computers. You need to ensure that clients can perform a PXE boot from Server1. Which two IPv4 options should you configure in DHCP? (Each correct answer presents part of the solution. Choose two.)

A. 003 Router
B. 066 Boot Server Host Name
C. 015 DNS Domain Name
D. 006 DNS Servers
E. 060 Option 60

Answer: BE

NEW QUESTION 124
You network contains an Active Directory domain named contoso.com. The domain contains a member server named Server1 that runs Windows Server 2016 and has the DNS Server role installed. Automatic scavenging of state records is enabled and the scavenging period is set to 10 days. All client computers dynamically register their names in the contoso.com DNS zone on Server1. You discover that the names of multiple client computers that were removed from the network several weeks ago can still be resolved. You need to configure Server1 to automatically remove the records of the client computers that have been offline for more than 10 days.
Solution: You set the Expires after value of the zone.
Does this meet the goal?

A. Yes
B. No

Answer: B

NEW QUESTION 125
You have an IP Address Management (IPAM) server named IPAM1 that runs Windows Server 2016. IPAM1 manages 10 DHCP servers. You need to provide a user with the ability to track which clients receive which IP addresses from DHCP. The solution must minimize administrative privileges.

A. IPAM MSM Administrators
B. IPAM ASM Administrators
C. IPAM IP Audit Administrators
D. IPAM User

Answer: A

NEW QUESTION 126
You are implementing a new network. The network contains a DHCP server named DHCP1 that runs Windows Server 2016. DHCP1 contains a scope named Scope1 for the 192.168.0/24 subnet. Your company has the following policy for allocating IP addresses:
  • All server addresses must be excluded from DHCP scopes.
  • All client computer must receive IP addresses from Scope1.
  • All Windows servers must have IP addresses in the range of 192.168.0.200 to 192.168.0.240.
  • All other network devices must have IP addresses in the range of 192.168.0.180 to 192.168.0.199.
You deploy a print device named Print1. You need to ensure that Print1 adheres to the policy for allocating IP addresses. Which command should you use?

A. Add-DhcpServerv4Lease
B. Add-DhcpServerv4ExclusionRange
C. Add-DhcpServerv4Filter
D. Add-DhcpServerv4Reservation

Answer: B

NEW QUESTION 127
You have an Active Directory forest that contains 30 servers and 6,000 Client computers. You deploy a new DHCP server that runs Windows Server 2016. You need to retrieve the list of the authorized DHCP servers. Which command should you run?

A. Get-DHCPServerDatabase
B. Netstat -p IP -s -a
C. Get-DHCPServerInDc
D. Show-ADAuthenticationPolicyExpression-AllowedToAuthenticateTo

Answer: C
Explanation:
To get all authorized DHCP servers in Active Directory, you can use the following PowerShell cmdlet: Get-DhcpServerinDC.

NEW QUESTION 128
You have a DHCP server named Server1. Server1 has an IPv4 scope that contains 100 addresses for a subnet named Subnet! Subnet1 provides guest access to the Internet. There are never more than 20 client computers on Subnet1 simultaneously; however, the computers that connect to Subnet 1 are rarely the same computers. You discover that some client computers are unable to access the network. The computers that have the issue have IP addresses in the range of 169.254.0.0/16. You need to ensure that all of the computers can connect successfully to the network to access the Internet. What should you do?

A. Create a new scope that uses IP addresses in the range of 169.254.0.0/16.
B. Modify the scope options.
C. Modify the lease duration.
D. Configure Network Access Protection (NAP) integration on the existing scope.

Answer: A

NEW QUESTION 129
You have a Hyper-V server named Server1 that runs Windows Server 2016. Server1 has an IP address of 192.168.1.78. Server1 has a container named Container1 that hosts a web application on port 84. Container1 has an IP address of 172.16.5.6. Container1 has a port mapping from port 80 on Server1 to port 84 on Container1. You have a server named Server2 that has an IP address of 192.168.1.79. You need to connect to the web application from Server2. To which IP address and port should you connect?

A. 172.16.5.6:80
B. 192.168.1.78:80
C. 172.16.5.6:84
D. 192.168.1.78:84

Answer: A

NEW QUESTION 130
You have a remote access server named Server1 that runs Windows Server 2016. Server1 has DirectAccess enabled. You have a proxy server named Server2. All computers on the internal network connect to the Internet by using the proxy. On Server1, you run the command Set-DAClient -forceTunnel Enabled. You need to ensure that when a DirectAccess client connects to the network, the client accesses all the Internet resources through the proxy. What should you run on Server1?

A. Set-DnsClientGlobalSetting
B. Set-DAEntryPoint
C. Set-DnsClientNrptRule
D. Set-DnsClientNrptGlobal

Answer: B

NEW QUESTION 131
You have an IP Address Management (IPAM) deployment that is used to manage all of the DNS servers on your network. IPAM is configured to use Group Policy provisioning. You discover that a user adds a new mail exchanger (MX) record to one of the DNS zones. You want to identify which user added the record. You open Event Catalog on an IPAM server, and you discover that the most recent event occurred yesterday. You need to ensure that the operational events in the event catalog are never older than one hour. What should you do?

A. From the properties on the DNS zone, modify the refresh interval.
B. From an IPAM_DNS Group Policy object (GPO), modify the Group Policy refresh interval.
C. From Task Scheduler, modify the Microsoft\Windows\IPAM\Audit task.
D. From Task Scheduler, create a scheduled task that runs the Update-IpamServer cmdlet.

Answer: A

NEW QUESTION 132
You have a DHCP server named Server1. Server1 has an IPv4 scope that serves 75 client computers that run Windows 10. When you review the address leases in the DHCP console, you discover several leases for devices that you do not recognize. You need to ensure that only the 75 Windows 10 computers can obtain a lease from the scope. What should you do?

A. Run the Add-DhcpServerv4ExclusionRange cmdlet.
B. Create and enable a DHCP filter.
C. Create a DHCP policy for the scope.
D. Run the Add-DhcpServerv4OptionDefinition cmdlet.

Answer: C

NEW QUESTION 133
......

Download more NEW Pass Leader 70-741 PDF dumps from Google Drive here:

https://drive.google.com/open?id=0B-ob6L_QjGLpRUl1Y0xaTTdfTjQ

OR

Read the newest Pass Leader 70-741 exam questions from this Blog:

http://www.microsoftbraindumps.com/?s=70-741

Good Luck!!!
 
Last edited:

AlinaJay

Banned
Banned
Joined
Jun 26, 2018
Messages
196
Reaction score
119
Points
18
Recently pass MCSA exam, I don't really remember who advised me this website and this 70-741 pdf file, but really thankful. Before actual exam because 70-741 practice questions offers you to appear in in the computerized test that is similar to the actual test .This rehearsal is the best way to evaluate your preparation. I think this is the best way to prepare your exam in short time. Best of luck.
 

Scot Wills

Member
Member
Joined
Jun 28, 2018
Messages
69
Reaction score
31
Points
6
I pass the 70-741 exam recently and I was very thankful to braindumpspdf. I got 92% marks. I prepare this exam from latest 70-741 practice exam questions. This rehearsal is the best way to evaluate your preparation. I am sure you will pass your exam on the first attempt. Best of luck.
 

Hector Garrity

Member
Member
Joined
Aug 8, 2016
Messages
94
Reaction score
4
Points
8
The new 70-741 dumps (Aug/2018 Updated) now are available, here are part of 70-741 exam questions (FYI):

[Get the download link at the end of this post]


NEW QUESTION 189
You have Hyper-V host named Server1. Serve1 has a network adapter that has virtual machine queue (VMQ) enabled. The network adapter connects at 10 Gbps and has an IPv4 address. Server1 hosts a virtual machine named VM1. VM1 has a single network adapter and four processors. You need to distribute the network processing load across the VM1 processors. What should you do?

A. From Device Manager on Server1, configure TCP Checksum Offload (IPv4).
B. From Windows PowerShell on VM1, run the Enable-NetAdapterRSS cmdlet.
C. From Windows PowerShell on Server1, run the Enable-NetAdapterPacketDirect cmdlet.
D. From Windows PowerShell on VM1, run the Enable-NetAdapterPacketDirect cmdlet.

Answer: B

NEW QUESTION 190
Your network contains an Active Directory domain named contoso.com. The domain contains a Hyper-V host. You are deploying Software Defined Network (SDN) by using Windows Server 2016. You deploy a virtual machine that runs Windows Server 2016, and you install the Network Controller server role. You need to configure the virtual machine as the network controller. What should you do?

A. Run the Install-NetworkControllerCluster cmdlet and set ClientAuthentication to X509.
B. Run the Install-NetworkController cmdlet and set ClientAuthentication to None.
C. Run the Install-NetworkControllerCluster cmdlet and set ClientAuthentication to None.
D. Run the Install-NetworkController cmdlet and set ClientAuthentication to Kerberos.

Answer: D

NEW QUESTION 191
Your company has five departments, including a web research department. You have a DHCP server named Server1 and two DNS servers named DNS1 and DNS2. Server1 has an IPv4 scope named Scope1. All client computers are configured to use DNS1 for name resolution. You need to ensure that users in the web research department use DNS2 for name resolution. What should you do on Server1?

A. From the properties of Scope1, modify the Conflict detection attempts setting.
B. From the properties of Scope1, configure Name Protection.
C. From the properties of IPv4, configure the bindings.
D. From IPv4, create a new filter.
E. From the properties of Scope1, create an exclusion range.
F. From IPv4, run the DHCP Policy Configuration Wizard.
G. From Control Panel, modify the properties of Ethernet.
H. From Scope1, create a reservation.

Answer: A

NEW QUESTION 192
You have an IP Address Management (IPAM) server named Server1 that runs Windows Server 2016. You have five DHCP servers. Server1 manages all of the DHCP servers. On Server1, an administrator uses Purge Event Catalog Data to remove all of the events from the last 30 days. You need to view all of these lease requests that were denied during the last two days. What should you do?

A. On each DHCP server, run the \Microsoft\Windows\Server Manager\CleanUpOldPerfLogs scheduled task, and then review the event catalog on Server1.
B. On Server1, run the Purge Event Catalog Data action and then open Event Viewer on Server1.
C. Review the log data in C:\Windows\System32\ipam\Database on Server1.
D. On each DHCP server, review the DHCP Server operational event log.

Answer: C

NEW QUESTION 193
You have a server named Server1 that runs Windows Server 2016. Server1 is an IP Address Management (IPAM) server that collects DHCP and DNS logs and events for your entire network. You need to get the IP addresses that were assigned to a client computer named Computer1 during the last week. What should you do on Server1?

A. Open Event Viewer and click Windows Logs. Filter the Forwarded Events log for Computer1.
B. Open Event Viewer and click Windows Logs. Filter the Security log for Computer1.
C. Run the Get-IpamAddress cmdlet.
D. Run the Get-IpamIpAddressAuditEvent cmdlet.

Answer: D

NEW QUESTION 194
You are implementing a secure network. The network contains a DHCP server named Server1 that runs Windows Server 2016. You create a DHCP allow filter that contains all of the computers on the network that are authorized to receive IP addresses. You discover that unauthorized computers can receive an IP address from Server1. You need to ensure that only authorized computers can receive an IP address from Server1.
Solution: You run the following command:
Set-DhcpServerv4FilterList –ComputerName Server1 –Allow False –Deny True
Does this meet the goal?

A. Yes
B. No

Answer: B

NEW QUESTION 195
You are implementing a secure network. The network contains a DHCP server named Server1 that runs Windows Server 2016. You create a DHCP allow filter that contains all of the computers on the network that are authorized to receive IP addresses. You discover that unauthorized computers can receive an IP address from Server1. You need to ensure that only authorized computers can receive an IP address from Server1.
Solution: You run the following command:
Add-DHCPServer4Filter –ComputerName Server1 –MacAddress * -List Allow
Does this meet the goal?

A. Yes
B. No

Answer: A

NEW QUESTION 196
You are implementing a secure network. The network contains a DHCP server named Server1 that runs Windows Server 2016. You create a DHCP allow filter that contains all of the computers on the network that are authorized to receive IP addresses. You discover that unauthorized computers can receive an IP address from Server1. You need to ensure that only authorized computers can receive an IP address from Server1.
Solution: You run the following command:
Add-DHCPServer4Filter –ComputerName Server1 –MacAddress * -List Deny
Does this meet the goal?

A. Yes
B. No

Answer: B

NEW QUESTION 197
You have an IP Address Management (IPAM) server named IPAM1 that runs Windows Server 2016. IPAM1 manages all of the DHCP servers on your network. You are troubleshooting an issue for a client that fails to receive an IP address from DHCP. You need to ensure that from IPAM1, you can view all of the event data for the DHCP leases from the last 24 hours.
Solution: From Windows PowerShell, you run the Invoke-IpamServerProvisioning cmdlet.
Does this meet the goal?

A. Yes
B. No

Answer: B

NEW QUESTION 198
You have an IP Address Management (IPAM) server named IPAM1 that runs Windows Server 2016. IPAM1 manages all of the DHCP servers on your network. You are troubleshooting an issue for a client that fails to receive an IP address from DHCP. You need to ensure that from IPAM1, you can view all of the event data for the DHCP leases from the last 24 hours.
Solution: From Windows PowerShell, you run the Set-IpamDHCPServer cmdlet.
Does this meet the goal?

A. Yes
B. No

Answer: B

NEW QUESTION 199
You have an IP Address Management (IPAM) server named IPAM1 that runs Windows Server 2016. IPAM1 manages all of the DHCP servers on your network. You are troubleshooting an issue for a client that fails to receive an IP address from DHCP. You need to ensure that from IPAM1, you can view all of the event data for the DHCP leases from the last 24 hours.
Solution: From Server Manager, you run Retrieve Event Catalog Data.
Does this meet the goal?

A. Yes
B. No

Answer: A

NEW QUESTION 200
You implement Software Defined Networking (SDN) by using the Network Controller server role. You have a virtual network named VNET1 that contains servers used by developers. You need to ensure that only devices from the 192.168.0.0/24 subnet can access the virtual machine in VNET1. What should you configure?

A. a network security group (NSG)
B. role-based access control
C. a universal security group
D. Dynamic Access Control

Answer: A

NEW QUESTION 201
You have a virtual machine named Server1 that runs Windows Server 2016. You plan to use Server1 as part of a Software Defined Networking (SDN) solution. You need to implement the Border Gateway Protocol (BGP) on Server1. What should you install?

A. the Peer Name Resolution Protocol (PNRP) feature
B. the Routing role service
C. the Network Device Enrollment Service role service
D. the Network Policy and Access Services server role

Answer: B

NEW QUESTION 202
Hotspot
You have a Nano Server that has one network interface. The server is configured to obtain an IP address automatically. You need to configure the server to have the following IP configurations:
  • IP address: 172.16.3.100
  • Default gateway: 172.16.3.1
  • Subnet mask: 255.255.255.0
What command should you run? (To answer, select the appropriate options in the answer area.)


Answer:

NEW QUESTION 203
Drag and Drop
You have a server named Server1 that runs Windows Server 2016. You need to deploy the first node cluster of a Network Controller cluster. Which four cmdlets should you run in sequence? (To answer, move the appropriate cmdlets from the list of cmdlets to answer area and arrange them in the correct order.)


Answer:

NEW QUESTION 204
......

Download more NEW Pass Leader 70-741 PDF dumps from Google Drive here:

https://drive.google.com/open?id=0B-ob6L_QjGLpRUl1Y0xaTTdfTjQ

OR

Read the newest Pass Leader 70-741 exam questions from this Blog:

http://www.microsoftbraindumps.com/?s=70-741

Good Luck!!!
 
Last edited:

AlinaJay

Banned
Banned
Joined
Jun 26, 2018
Messages
196
Reaction score
119
Points
18
I just wanted to share with you that I passed my 70-741 Exam yesterday. It’s due to Well Compiled 70-741 dumps pdf proportional material because 70-741 dumps are very clear and are in detail. If you really want to study with motivation and energy, buy 70-741 braindumps. I had a very pleasant experience and would love to recommend it to my friends.
 

Greek Smi

Member
Member
Joined
Sep 10, 2018
Messages
84
Reaction score
31
Points
6
I have heard about a lot of websites which offer dumps and study material but I was not satisfied with their services. BraindumpsPDF.com offers a wide range of benefits like regular updates , beautiful presentation and 24/7 support. I passed my 70-741 exam after purchasing 70-741 dumps from them. This website is superb.
 

Hector Garrity

Member
Member
Joined
Aug 8, 2016
Messages
94
Reaction score
4
Points
8
The new 70-741 dumps (Oct/2018 Updated) now are available, here are part of 70-741 exam questions (FYI):

[Get the download link at the end of this post]


NEW QUESTION 208
You are deploying Software Defined Networking (SDN) by using Windows Server 2016. You plan to deploy a three-node Network Controller cluster. You plan to use virtual machines for the network controller and the management client. The virtual machines will NOT be domain-joined. You need to configure authentication for the cluster. Which command should you run?

A. Install-NetworkController -Node @{Node1, Node2, Node3} -ClientAuthentication X509
B. Install-NetworkControllerCluster -Node @{Node1, Node1, Node3} -ClientAuthentication Kerberos
C. Install-NetworkControllerCluster -Node @{Node1, Node1, Node3} -ClientAuthentication X509
D. Install-NetworkControllerCluster -Node @{Node1, Node1, Node3} -ClientAuthentication None
E. Install-NetworkController -Node @{Node1, Node2, Node3} -ClientAuthentication Kerberos

Answer: C

NEW QUESTION 209
You have an IP Address Management (IPAM) server named IPAM1 that runs Windows Server 2016. IPAM1 manages all of the DHCP servers on your network. You are troubleshooting an issue for a client that fails to receive an IP address from DHCP. You need to ensure that from IPAM1, you can view all of the event data for the DHCP leases from the last 24 hours.
Solution: From Task Scheduler, you run the Microsoft\Windows\IPAM\Audit task.
Does this meet the goal?

A. Yes
B. No

Answer: B

NEW QUESTION 210
You have a server named Server1 that runs Windows Server 2016. Server1 is configured as a VPN server. Server1 is configured to allow domain users to establish VPN connections from 06:00 to 18:00, every day of the week. You need to ensure that domain users can establish VPN connections only between Monday and Friday.
Solution: From Network Policy Server, you modify the Network Policies on Server1.
Does this meet the goal?

A. Yes
B. No

Answer: A

NEW QUESTION 211
Your company owns the public Internet IP address range of 131.107.20.0 to 131.107.20.255. You need to create a subnet that supports four hosts. The solution must minimize the number of addresses available to the subnet. Which subnet should you use?

A. 131.107.20.16 with subnet mask 255.255.255.248
B. 131.107.20.16/28
C. 131.107.20.0/27
D. 131.107.20.16/30

Answer: A

NEW QUESTION 212
You have Hyper-V host named Server1. Server1 has a network adapter that has virtual machine queue (VMQ) enabled. The network adapter connects at 10 Gbps and has an IPV4 address. Server1 hosts a virtual machine named VM1. VM1 has a single network adapter and four processors. You need to distribute the network processing load across the VM1 processors. What should you do?

A. From Windows PowerShell on Server1, run the Enable-NetAdapterPacketDirect cmdlet.
B. From Windows PowerShell on VM1, run the Enable-NetAdapterPacketDirect cmdlet.
C. From Device Manager on VM1, configure Receive Side Scaling.
D. From Windows PowerShell on Server1, run the Enable-NetAdapterRSS cmdlet.

Answer: C

NEW QUESTION 213
You have a server named Server1 that runs Windows Server 2016. Server1 is an IP Address Management (IPAM) server that collects DHCP and DNS logs and events for your entire network. You need to get the IP addresses that were assigned to a client computer named Computer1 during the last week. What should you do on Server1?

A. From the IPAM node in Server Manager, click Event Catalog, and then review the IP Address Tracking.
B. Open Event Viewer and click Windows Logs. Filter the Security log for Computer1.
C. Run the Export-IpamAddress cmdlet.
D. From the IPAM node in Server Manager, click IP Address Space, and then review the IP Address Inventory.
E. Run the Get-IpamDhcpConfigurationEvent cmdlet.

Answer: A

NEW QUESTION 214
Hotspot
Your network contains an Active Directory domain named contoso.com. The domain contains two servers named Server1 and Server2 that run Windows Server 2016. Server1 has IP Address Management (IPAM) installed. Server2 has the DHCP Server role installed. The IPAM server retrieves data from Server2. You create a domain user account named User1. You need to ensure that User1 can use IPAM to manage DHCP. Which command should you run on Server1? (To answer, select the appropriate options in the answer area.)


Answer:

NEW QUESTION 215
You have a remote access server named Server1 that runs Windows Server 2016. Server1 has DirectAccess enabled. You have a proxy server named Server2. All computers on the internet connect to the Internet by using the proxy. On Server1, you run the command Set-DAClient -ForceTunnel Enabled. You need to ensure that when a Direct Access client connects to the network, the client accesses all the Internet resources through the proxy. What should you run on Server1?

A. Set-DAClient
B. Set-DnsClientGlobalSetting
C. Set-DAClientDNSConfiguration
D. Set-DAEntryPoint

Answer: C

NEW QUESTION 216
You have a server named Server1 that runs Windows Server 2016 and is configured as a domain controller. You install the DNS Server server role on Server1. You plan to store a DNS zone in a custom Active Directory partition. You need to create a new Active Directory partition for the zone. What should you use?

A. Set-DnsServer
B. DNS Manager
C. New-ADObject
D. Ntdsutil.exe
E. Active Directory Sites and Services

Answer: B

NEW QUESTION 217
You have a DNS server named Server1 that runs Windows Server 2016. Server1 has two Active Directory-integrated zones named contoso.com and adatum.com. All client computers run Windows 10. Server1 recently experienced millions of erroneous DNS queries causing a denial of service. You need to reduce the likelihood that a similar attack will cause a denial of service. The solution must ensure that Server1 continuous to resolve names for clients. What should you do?

A. Implement DNS-based Authentication of Named Entities (DANE)
B. Enable Response Rate Limiting (RRL) on Server1
C. Configure DNS policies on Server1
D. Sign both adatum.com and contoso.com zones

Answer: B

NEW QUESTION 218
You have a server named Server1 that runs Windows Server 2016. Server1 is in a workgroup and has the DNS Server role installed. You need to enable DNS analytical diagnostic logging on Server1. What should you do?

A. From Local Group Policy Editor, configure Audit Policy.
B. From DNS Manager, configure Monitoring.
C. From Windows PowerShell, run the Enable-DnsServerPolicy cmdlet.
D. From DNS Manager, configure Event Logging.
E. From Event Viewer, configure DNS-Server Applications and Services Logs.

Answer: E

NEW QUESTION 219
You have an IP Address Management (IPAM) server named IPAM1 that runs Windows Server 2016. IPAM1 manages 10 DHCP servers. You need to provide a user with the ability to track which clients receive which IP addresses from DHCP. The solution must minimize administrative privileges. To which group should you add the user?

A. IPAM IP Audit Administrators
B. IPAM ASM Administrators
C. IPAM MSM Administrators
D. IPAM User

Answer: A

NEW QUESTION 220
Drag and Drop
You have a Hyper-V host named Host1 that runs Windows Server 2016 Datacenter. Host1 has eight network adapters that support Remote Direct Memory Access (RDMA). You plan to configure Host1 as part of a four-node Hyper-V converged solution. You enable the Data Center Bridging (DCB) feature. You need to enable Switch Embedded Teaming (SET) and RDMA. Which three cmdlets should you run in sequence? (To answer move the appropriate cmdlets from the list of cmdlets to the answer area and arrange them in the correct order.)


Answer:

NEW QUESTION 221
......

Download more NEW Pass Leader 70-741 PDF dumps from Google Drive here:

https://drive.google.com/open?id=0B-ob6L_QjGLpRUl1Y0xaTTdfTjQ

OR

Read the newest Pass Leader 70-741 exam questions from this Blog:

http://www.microsoftbraindumps.com/?s=70-741

Good Luck!!!
 
Last edited:

Hector Garrity

Member
Member
Joined
Aug 8, 2016
Messages
94
Reaction score
4
Points
8
The new 70-741 dumps (Mar/2019 Updated) now are available, here are part of 70-741 exam questions (FYI):

[Get the download link at the end of this post]


NEW QUESTION 234
You have a Hyper-V host named Server 1. The network adapters on Server1 have single root I/O virtualization (SR-IOV) enabled. Server1 hosts a virtual machine named VM1 that runs Windows Server 2016. You need to identify whether SR-IOV is used by VM1.
Solution: You sign in to VM1. You run the Get-NetAdapterSriov cmdlet.
Does this meet the goal?

A. Yes
B. No

Answer: A

NEW QUESTION 235
You have a Hyper-V host named Server 1. The network adapters on Server1 have single root I/O virtualization (SR-IOV) enabled. Server1 hosts a virtual machine named VM1 that runs Windows Server 2016. You need to identify whether SR-IOV is used by VM1.
Solution: You sign in to VM1. You view the properties of the network connections.
Does this meet the goal?

A. Yes
B. No

Answer: B

NEW QUESTION 236
You have a Hyper-V host named Server 1. The network adapters on Server1 have single root I/O virtualization (SR-IOV) enabled. Server1 hosts a virtual machine named VM1 that runs Windows Server 2016. You need to identify whether SR-IOV is used by VM1.
Solution: On Server1, you open Hyper-V Manager and view the Integration Services settings of VM1.
Does this meet the goal?

A. Yes
B. No

Answer: B

NEW QUESTION 237
You have a Hyper-V host named Server 1. The network adapters on Server1 have single root I/O virtualization (SR-IOV) enabled. Server1 hosts a virtual machine named VM1 that runs Windows Server 2016. You need to identify whether SR-IOV is used by VM1.
Solution: You sign in to VM1. You open Device Manager and view the properties of the network adapters.
Does this meet the goal?

A. Yes
B. No

Answer: B

NEW QUESTION 238
Your network contains an Active Directory domain named contoso.com. The domain contains a server named Server2 that runs Windows Server 2016. The DHCP Server server role is installed on Server2. The DNS server role is installed on a server named Server3. The network contains 500 non-Windows devices that are registered in the DNS zone of contoso.com. You configure Server2 to lease IP addresses to the non-Windows devices. You need to prevent Server2 from overwriting the host (A) records for the non-Windows devices. What should you run?

A. dism.exe
B. dns.exe
C. dnscmd.exe
D. netsh.exe
E. Set-DhcpServerDatabase
F. Set-DhcpServerv4DnsSetting
G. Set-DhcpServerv6DnsSetting
H. Set-DNSServerSetting

Answer: C

NEW QUESTION 239
You have a server named Server1 that runs Windows Server 2016. Server1 is an IP Address Management (IPAM) server that collects DHCP and DNS logs and events for your entire network. You need to enable a user named TECH1 to create pointer (PTR), host (A) and service location (SRV) records on all of the DNS servers on the network. What should you do on Server1?

A. Run the Set-IpamRange cmdlet, and then run the Set-IpamAddressSpace cmdlet.
B. Run the Set-IpamCustomField cmdlet, and then run the Set-IpamAccessScope cmdlet.
C. From the IPAM node in Server Manager, assign the IPAM DNS Administrator Role to TECH1 and create a new access policy.
D. From the IPAM node in Server Manager, assign the IPAM DNS Administrator Role to TECH1 and create a new access scope.

Answer: D

NEW QUESTION 240
You have a server named Server1 that has a Server Core installation of Windows Server 2016. Server1 is configured to obtain an IP address automatically. You need to configure the IPv4 address, netmask, and default gateway manually for a network interface named Ethernet on Server1. What should you run?

A. ipconfig.exe
B. New-NetIPAddress
C. Set-NetAdapter
D. Set-NetIPv4Protocol

Answer: B

NEW QUESTION 241
Drag and Drop
Your network contains an Active Directory domain named contoso.com. The domain contains two servers named Server1 and Server2 that run Windows Server 2016. Server1 has IP Address Management (IPAM) installed. Server2 has Microsoft System Center 2016 Virtual Machine Manager (VMM) installed. You need to integrate IPAM and VMM. Which types of objects should you create on each server? (To answer, drag the appropriate object types to the correct servers. Each object type may be used once, more than once, or not at all. You may need to drag the split bar between panes or scroll to view content.)


Answer:


NEW QUESTION 242
Hotspot
You use a Network Policy Server (NPS) server named NPS1 to authenticate VPN connections and connections to wireless access points (WAPs). You plan to add a new WAP named WAP1. What should you do on WAP1 and NPS1? (To answer, select the appropriate options in the answer area.)


Answer:


NEW QUESTION 243
You have a server named Server1 that runs Windows Server 2016 and is configured as a domain controller. You install the DNS Server server role on Server1. You plan to store a DNS zone in a custom Active Directory partition. You need to create a new Active Directory partition for the zone. What should you use?

A. Set-DnsServer
B. Dns.exe
C. Ntdsutil.exe
D. Active Directory Administrative Center

Answer: C

NEW QUESTION 244
You are deploying a small network that has 30 client computers. The network uses the 192.168.1.0/24 address space. All computers obtain IP configurations from a DHCP server named Server1. You install a server named Server2 that runs Windows Server 2016. Server2 has two network adapters named Internal and Internet. Internet connects to an Internet Service Provider (ISP) and obtains the 131.107.0.10 IP address. Internal connects to the internal network and is configured to use the 192.168.1.250 IP address. You need to provide Internet connectivity for the client computers. What should you do?

A. On Server2, select the Internet and Internal network adapters and bridge the connections.
From the DHCP console on Server1, authorize Server2.
B. On Server2 run the New-NetNat -Name NAT1 -InternalIPInterfaceAddressPrefix 192.168.1.0/24 cmdlet. Configure Server1 to provide the 003 Router option of 131.107.0.10.
C. On Server1, stop the DHCP server.
On the Internet adapter on Server2, enable internet Connection Sharing (ICS).
D. Recreate the DHCP scope on Server1 to lease addresses from the 131.107.0.0/24 address space.
On Server2, change the IP address of the internal network adapter to 131.107.0.1.
Configure Server1 to provide the 003 Router option of 131.107.0.1.

Answer: B

NEW QUESTION 245
You have an Active Directory forest that contains 30 servers and 6,000 client computers. You deploy a new DHCP server that runs Windows Server 2016. You need to retrieve the list of the authorized DHCP servers. Which command should you run?

A. Get-ADResourceProperty -Filter DHCP
B. Netsh DHCP show server
C. Netsh DHCP server initiate auth
D. Get-DHCPServerSetting

Answer: B

NEW QUESTION 246
......

Download more NEW Pass Leader 70-741 PDF dumps from Google Drive here:


OR

Read the newest Pass Leader 70-741 exam questions from this Blog:


Good Luck!!!
 

proeasyweb

Member
Member
Joined
Mar 1, 2019
Messages
50
Reaction score
0
Points
6
I think realexamcollection.com merits compliments and thankfulness for all the valuable work.2019 70-741 pdf has been framed out of the fair and true work by the specialists. I never thought Networking with Windows Server 2016 test as simple as I took it in the wake of getting ready from this brief guide. All the schedule themes were managed cautiously by being applicable. It was not difficult to construe the primary thought of every point. With no trouble I effectively understood every one of the inquiries. It was just through 70-741 dumps pdf that I got my objective score. Pragmatic methodology has been pursued while composing this manual. I am appreciative to specialists for every one of the endeavors they made for the arrangement of this material.
 
Top